Notes For Use Of Tool Grinder

Notes For Use Of Tool Grinder

1. Please read the user manual carefully before starting using maintaining or performing any operation. Follow the instructions and information. Non-operators are not allowed to use the machine. 2. Please wear proper safety clothing, glasses and gloves during operation to prevent the injury of metal debris. Please do not wear any rings, watches, necklaces or incompactmoving clothes.(such as ties, scarves, unbuttoned jackets, or unzipped overalls, worn clothes and so on). These are likely to be caught up in the moving parts of the equipment. 3. The Tool Grinder cannot be used in case of failure. If there is an operational problem, please report to the supervisor in time. 4. Before starting the machine, please check whether all parts have been eliminated safety hazards and protective measures are appropriate. 5. The area for maintenance and operation (routine maintenance and special maintenance) must be dry and clean and fully equipped in good working condition. 6. Any repair must be made after the Tool Grinder equipment is stopped and the power is disconnected.No bare wire lighting is allowed during leak inspection and testing. 7. Never use detergent, gasoline, solvents, or other flammable liquids, but use permitted non-flammable non-toxic commercial solvents. 8. When the equipment is in the active state, lubrication is not allowed. 9. Make sure the Tool Grinder voltage and frequency meet the requirements before making electrical connections. The electrical connection of the power supply must be well grounded. 10. Any operation of the electrical systems, such as replacement of fuse, overload protector replacement and so on must be handled by a professional person and the power of the equipment must be cut off.